Programming the Microprocessor

Use Notepad++ to write your source code.

Download and Install Notepad++ from https://notepad-plus-plus.org/
Open Notepad and select File and then select New
Select Language and then select the Letter A then select Assembly 
Select File again and then Save AS [enter a file name for your program] 
Make sure it has the yourfilename.asm extension click Save
 

Example code:
      STX #$6ffc ; capture x reg
      LDX #$55    ; set counter to binary 10101010
count EQU *
      LDA #$0f   ; Turn on half of the LED's 00001111
      STA $6000  ; Write value to VIA chip
      DEX	 ; Decrease the X register by 1
      LDA #$f0   ; Turn on half of the LED's 11110000
      BNE count
      LDX $6ffc  ; Restore X reg to orginal value
      LDA #$00   ; turn off all LED's 00000000
      STA $6000  ; Write value to VIA chip

---