Main Page

From media_wiki
Jump to: navigation, search

MicroRusty Embedded Workshop Wiki.


Temperature in Jim's Den


Consult the User's Guide for information on using the wiki software.

AVRDUDE Class

How to use AVRdude to flash your program to the Micro-controller.
How to change the fuse settings (Clock speeds) 1MHz, 8MHz 16MHz.
How to use the AVR Inline assembly language in the Arduino IDE. How to use AVRdude int the terminal mode.    
How to use the Arduino IDE to compile code and flash using the USB programmer through the ISP. 
How to export the hex file and use it to program directly into Flash. How to read and write to EEPROM.

ATmega328p Target Bd Microrusty

The design goals for this project is to make an inexpensive minimalist target board using an ATmega328P.  
Explain the processes used for programming the Micro-controller using the 6-pin ISP header using SPI interface. 

Raspberry Pi

Future Classes

STM32 Workshops

KiCad 5.0

Design an RTC using the PCF85263AT/AJ

PCF85263AT RTC by Microrusty

How to use the PCF85263AT/AJ RTC 

Power Fail Logger by Microrusty

Design a Power fail Logger using a RTC and SD Card  

65C02 Vintage Computer Build