Difference between revisions of "Installation and use"
(Created page with "'''Installation and setup'''<br> Connect a USB Micro B cable with power adapter to the wall plug you want to monitor.<\ Connect the USB Micro B cable from that adapter into...") |
(No difference)
|
Revision as of 21:08, 17 August 2021
Installation and setup
Connect a USB Micro B cable with power adapter to the wall plug you want to monitor.<\ Connect the USB Micro B cable from that adapter into J1 on the PCB board. Note: This does not power the board microcontroller but will turn on the green LED on.
